Pipes do not fail all at once. They fail one fitting, one pinhole and one stained ceiling at a time, until a homeowner realizes they have called a plumber four times in two years. In Ocala, where a large share of homes were built between the 1960s and the mid-1990s, that pattern is common. K&K Plumbing provides whole-home repiping in Ocala that replaces aging supply lines with modern material, handles the Marion County permit, and leaves the walls patched.
Your Home’s Age Tells Us a Lot
Built before about 1980: galvanized steel
Galvanized pipe was the default in many older homes near downtown and in the earliest parts of SE Ocala. Its zinc coating wears away from the inside, and rust builds up until the pipe’s opening is a fraction of its original size. Typical signs include weak pressure at every fixture, brown water after the house sits unused, and leaks at threaded joints.
Built roughly 1978 to 1995: polybutylene
This gray plastic pipe was installed widely across Florida during those years. It degrades with long exposure to chlorinated water and tends to fail without warning, often at a fitting. Many insurers look closely at homes that still have it, which is one reason Ocala owners choose to replace it before selling or renewing a policy.
Older copper
Copper lasts a long time, but hard, mineral-heavy water and decades of service can lead to pinhole leaks, particularly in lines that run through the slab. If you have already had a slab leak, rerouting the supply lines overhead during a repipe can eliminate that risk going forward.
Warning Signs Worth Writing Down
Before the assessment, it helps to jot down what you have noticed and where. Useful details include which faucets lose pressure first, whether discoloration shows up in hot water, cold water or both, how many leaks you have had repaired and roughly when, and whether any ceilings or walls have been opened before. That history lets us judge whether the problem is spread across the whole system or confined to one branch that could be replaced on its own.
Choosing the New Pipe
We install three materials, and the right one depends on your home and budget:
- PEX is flexible, resists scale and corrosion, and needs fewer fittings, so it routes easily through attics and walls. It is the most common choice for Ocala repipes. Our article on the benefits of a PEX plumbing system explains why.
- Copper remains a durable, proven option for homeowners who prefer metal piping.
- CPVC is a rigid plastic that works well in some layouts and matches what many local homes already have.
How a Repipe Unfolds
- Assessment. We look at the existing pipe, test pressure and walk the attic and walls to plan routes.
- Written estimate. You get the scope, material and price up front, with no obligation.
- Permit. We pull the required Marion County permit.
- Installation. The crew runs new lines in sections, protecting floors and furniture as they go.
- Inspection and patching. After the inspection passes, drywall openings are patched and the house is cleaned.
Beyond the City Limits
We provide repiping services throughout Marion County, including Belleview and Dunnellon, and the same approach applies to the many homes from the same era in The Villages, described on our page about repiping in The Villages. Find our other local work on the Ocala service area page.
If your water pressure keeps dropping or the leaks keep coming, call or text 352-810-9472 to book a free repipe assessment and get a written plan for your home.