A leak you can see is a nuisance. A leak you can’t see is the expensive kind. Water escaping inside a wall, above a ceiling or along a buried yard line can run for weeks before a stain or a spike in the bill gives it away. K&K Plumbing’s water leak detection and repair service is built for exactly that situation: find the source precisely, fix it the right way, and help you deal with the aftermath.
A two-minute test you can do today
Before calling anyone, try the meter test:
- Shut off every faucet, the dishwasher, washing machine, ice maker and irrigation.
- Find your water meter, usually in a ground box near the street.
- Write down the reading, or watch the small triangle or star-shaped leak indicator.
- Wait 15 to 30 minutes without using any water, then check again.
If the number changed or the indicator moved, you have a leak. Next, close the main shutoff at the house and watch again. If the meter still moves, the leak is likely on the service line between the meter and your home. If it stops, the leak is inside. For more ways to narrow it down, our article on detecting water leaks at home is a good companion read.
Where leaks hide in Central Florida homes
| Location | Common cause | What you might notice |
|---|---|---|
| Walls behind sinks and tubs | Failed fittings, worn shower valves | Soft drywall, loose tile, swollen baseboards |
| Ceilings below attic lines | Pipes in hot attics, condensation, nail punctures | Brown rings, sagging drywall |
| Under the slab | Abrasion or corrosion of buried lines | Warm floor spots, cracked tile, sound of running water |
| Yard service line | Root intrusion, settling, irrigation digging | Soggy patch of lawn, low pressure |
| Water heater and supply connectors | Corroded nipples, aging braided hoses | Rust stains, puddles in the garage or closet |
If the evidence points under the floor, we bring in our dedicated slab leak detection process, which uses specialized equipment for leaks encased in concrete.
How we find the exact spot
Guesswork costs money. Our technicians combine several methods so the first opening is the right one:
- Pressure isolation separates hot and cold lines and individual branches to tell us which section is losing water.
- Acoustic listening picks up the sound of pressurized water escaping from a pipe, even behind tile or drywall.
- Thermal imaging shows temperature differences where hot water is leaking or where moisture is cooling a surface.
- Moisture meters confirm how far water has traveled into drywall, cabinets or flooring.
Repair options, from small to whole-system
The right fix depends on what failed and how much of the system shares that weakness.
- Spot repair. A single pinhole or loose fitting gets a cut-out and a new section with proper connections.
- Section replacement. If one run of pipe shows corrosion along its length, we replace that run instead of patching it repeatedly.
- Reroute. Lines buried in hard-to-reach places can sometimes be abandoned and replaced through walls or the attic.
- Repipe. When pinhole leaks keep showing up in different rooms, especially in older copper or polybutylene systems, a whole-home repipe is usually the more economical long-term answer.
We also check your static water pressure. Pressure that runs too high puts constant stress on joints and appliance hoses, and a failed or missing pressure-reducing valve is a common reason leaks repeat.
Containing damage and documenting it
When water has already reached flooring or drywall, the clock matters. We stop the flow, isolate the affected branch so the rest of the house keeps water where possible, and photograph the failed part and surrounding damage. Our plumbing damage inspection gives you a written record of what failed, which helps when you talk to an insurance adjuster or a water mitigation company. We don’t decide what your policy covers, but we make sure the plumbing side of the story is clear and accurate.
Florida factors worth knowing
Hard water and treatment chemicals in many Central Florida municipal systems can wear on copper from the inside, which is why pinhole leaks are so familiar in neighborhoods built in the 1980s and 1990s. Attic lines bake through long summers. Sandy soil shifts around buried pipes, and heavy rains can mask a yard leak until the water bill arrives. Homeowners in Leesburg and Summerfield see all of these, and so do customers throughout our eight-county service area.
When to call
If your meter test failed, you smell mustiness you can’t place, or a ceiling stain keeps growing, it’s time for a professional look. Call or text 352-810-9472 to set up leak detection with K&K Plumbing, and we will explain what we find and what it will cost before any repair begins.
What’s Included
- Water meter and pressure testing
- Acoustic and thermal leak location
- Pinhole and corroded pipe section repair
- Failed fitting and joint replacement
- Main service line leak repair
- Leak containment to limit damage
- Plumbing damage inspections
- Photo and written insurance documentation
- Pressure regulator checks to prevent repeat leaks
Why Choose K&K Plumbing for Water Leak Repair?
- Licensed, bonded and insured (CFC1431523)
- Pinpoint location before any drywall is opened
- Upfront pricing after the leak is found
- Experience with claims paperwork
- Clean, careful work inside occupied homes